User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Paging” component editor
MRX Designer User Guide
101
6 GAIN setting area
Each knob resets to the default value if you click it while holding down the <Alt> key.
In this area, you can make settings related to the line shown in green in the flow
depicted below.
•[RANGE] knob
Specifies the Program value while the chime is sounding or while the PGM1 is
broadcasting.
•[ATTACK] knob
Specifies the time from when the PGM1’s PTT turns on until the program decreases
to the RANGE value.
•[RELEASE] knob
Specifies the time from when the broadcast or the closing chime finishes playing
until the program returns to its original level. –
Program Output
0dB
Mic/SD Output
–∞
ReleaseAttack
Range
Mic Input
time
level
SD Input
Opening
Chime
Closing
Chime
PTT : On PTT : Off