User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“CROSSOVER” parameter setting window
MRX Designer User Guide
109
E [LIMITER] button
Opens a window where you can make limiter settings for each output channel. For
details on these settings, refer to “LIMITER” parameter setting window.
F [OUTPUT] meter
Displays the output signal level of each output channel.
“CROSSOVER” parameter setting window
Here you can make crossover settings for the output channels.
1 POLARITY [NORMAL]/[INVERTED] buttons
Specify whether the polarity of each output channel will be inverted.
2 [MUTE] button
Switches mute on/off for each output channel. This is linked with the [MUTE] button
of the “Speaker Processor” component editor.
3 Cross [Freq.] knob
Specifies the crossover frequency of each output channel.
4 [HPF]/[LPF] list box
Select the attenuation per octave and filter type for each output channel.
For details on the attenuation slope and filter types, refer to “Filter”.
5 HPF/LPF [Freq.] knobs
Specify the cutoff frequency of the HPF and LPF.
6 [Gc] knob
When [AdjustGc] (Adjustable Gc) is selected in the [HPF]/[LPF] list box, this knob
specifies the gain at the cutoff frequency.
1
4
5
6
2
3