User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“File Transfer” application
MRX Designer User Guide
122
❑ “File Transfer” application
This transfers exported files with a .rcsl extension, PDF files, or image files to an iPad in the same
network which has ProVisionaire Touch (V1.2 or later) or ProVisionaire Touch Kiosk installed.
Before transferring the file, start ProVisionaire Touch or ProVisionaire Touch Kiosk, and make it
visible in the screen.
If a network adapter is not selected, the [Network Setup] dialog box appears; select a network
adapter.
ProVisionaire Touch can receive files with the following extensions.
.rcsl, .pdf, .jpg, .jpeg, .bmp, .png, .pvt, .ypvt, ypvk
.pvt, .ypvt, and .ypvk files are saved in the file folder of ProVisionaire Touch. ProVisionaire Touch
Kiosk can only receive files with the .ypvk extension.
.rcsl can be used if the MRX7-D is registered as a device with ProVisionaire Touch.
.pdf, .jpg, .jpeg, .bmp, and .png can be used if ProVisionaire Touch places the corresponding widget.
1 [System] menu
From the “Network Setup” command, open the “Network Setup” dialog box.
2 Select a file to transfer
Select the file that you want to transfer. If you click the button at right, the “Open File”
dialog box appears, allowing you to select a file.
3 Destinations
Select the transfer-destination iPad. If the transfer-destination iPad is not shown, press
the [Search] button to search the network. The [Search] button is enabled if the file to
be transmitted is selected.
4 [Send] button
Sends the selected file to the selected iPad.
5 [Close] button
Closes the “File Transfer” application.
54
3
1
2