User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
“Parameter Sets” area
MRX Designer User Guide
31
4 [Duplicate] button
Duplicates the selected parameter set. If you want to duplicate the snapshots as well,
add a check mark to [Duplicate Snapshots Also] in the “Duplicate” dialog box that
appears.
5 [+]/[–] buttons
Completely expands or completely minimizes the parameter set display.
6 Parameter set name
Shows the name of the parameter set. You can double-click the parameter set name and
edit it.
If any parameter set in the “Parameter Sets” area is selected, pressing an alphabetical key
will select the parameter set of the matching initial letter.
7 [Store] button
Stores (saves) a snapshot.
8 [Recall] button
Recalls a snapshot.
9 [Clear] button
Deletes a snapshot.
0 [Name] field
Shows the name of the snapshot. You can double-click the snapshot name and edit it.
A [Fade Time] field
This shows the time (Fade Time) that is taken to change the level of fader components
or the send level of Matrix components that are registered in the parameter set. Double-
click this to open the “Fade Time” dialog box. In the dialog box that appears, specify the
time over which the change will happen. You can specify up to three hours.
NOTE