POWERED MONITOR SPEAKER MSP10STUDIO Owner’s manual Mode d’emploi Bedienungsanleitung Manual de instrucciones M
Thank you for purchasing the Yamaha MSP10STUDIO powered monitor speaker system. The MSP10STUDIO features a compact bass reflex cabinet, with a 20 cm two-way cone speaker and a 2.5 cm titanium dome speaker. This powered bi-amplifier speaker system faithfully reproduces sound and can be used for a wide range of applications, from personal home recordings to serious professional use.
• To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove all connecting cables. Damaged cables may cause fire or electrical shock. • This unit is heavy. Use two or more people to carry it. • Allow enough free space around the unit for normal ventilation. This should be: 10 cm at the sides, 30 cm behind, and 60 cm above. If the airflow is not adequate, the unit will heat up inside and may cause a fire.
Front panel/Rear panel 2 3 4 5 2 1 3 1 ON OFF POWER 6 2 TRIM switches 1 Power/Clip indicator This indicator lights up green when you turn ON the POWER switch on the rear panel. If the output level is too high, causing clipping at the amplifier, the indicator lights up red. In this case, lower the input level. These switches enable you to adjust the bass and treble for the MSP10STUDIO. LOW: three positions The LOW switch adjusts the bass range.
Specifications General specifications Type........................................... Amplified 2Way Bass Reflex Powered Speaker (Bi-Amp.) Crossover Frequency .................. 2.0 kHz, 30 dB/oct Frequency Range ....................... 40 Hz to 40 kHz (–10 dB) Sensitivity .................................. –10 dB at –6 dB position (for 100 dB/SPL, 1 m on Axis) Maximum Output Level ............. 110 dB (1 m on Axis) Dimensiones (W × H × D).......... 265 × 420 × 329 mm Weight ................................
Block Diagram HPF INPUT EQ HPF SENSITIVITY LOW CUT 0 –1.5 +1.5 LPF 0 –1.5 –3 LOW HIGH TRIM Mounting the MSP10STUDIO on the wall You can install the MSP10STUDIO on the wall using an optional Yamaha wall bracket BWS251-300. For more information on how to install it, refer to the instructions that come with the wall bracket. For the angle and position of installation, refer to the figure below.
Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2002 Yamaha Corporation V879530 207IPEPx.