User Manual
Table Of Contents
- System Requirements
- Installation
- Installing Speaker Data
- Uninstalling
- Table of Contents
- 1. Y-S3 General Operation
- 2. Constructing the Room Shape & Audience Area
- 3. Editing Project Properties
- 4. Placing Speakers
- 5. Adjusting Speaker Parameters
- 5-1. Speaker Arrays
- 5-2. Distributed Speakers
- 6. Displaying Calculation Results
- 7. Simulation Results Report
- 8. Exporting Configurations in DME Designer Format
- 9. Other Functions
- 10. General Theory
Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
54
7. Simulation Results Report
• Overview
Y-S
3
can save calculation results as reports and data for use as reference material. Select [Export (E)] from the [File
(F)] menu. You can save data in a variety of formats. Select [Product List (P)] from the [Option (O)] menu to save a list
of the equipment used in the project.
• Project report
You can save a project report which outputs a variety of data (including the following), in HTML format.
• Project Summary: An overview of the project
• Venue Geometry: Room type and size
• Product List: A list of equipment used
• System Diagram: Signal processor, amplifiers, and speaker composition
• Frequency Responses: Coordinates for each receiving point and frequency response graphs
• Contour Map: A contour figure for the specified frequencies
• SPL Color Map: A sound pressure layer map for the specified frequencies
• Array Properties: The properties of installed speaker arrays and distributed speaker
• Generating and saving project reports
Click in the tool bar to generate and save a project report file in HTML format. Select [Export (E)] from the [File
(F)] menu, these select [Project Report (R)…(*html)] to open the Export Project Report window.
Export Project Report