Operation Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
cap as shown in illustration “A”,
turn the adjusting bolt in direction
(b) until the alignment marks
match.
To set the standard setting, turn
the adjusting bolt 7 complete turns
in direction (b), making sure the
alignment marks match.
b. If the alignment mark on the ad-
justing bolt is positioned before the
alignment mark on the front fork
cap as shown in illustration “B”,
turn the adjusting bolt in direction
(b) until the alignment marks
match.
To set the standard setting, turn
the adjusting bolt 6 complete turns
in direction (b), making sure the
alignment marks match.
1. Spring preload adjusting bolt
2. Alignment marks
2
1
(b)
(a)
È
1. Spring preload adjusting bolt
2. Alignment marks
1
(b)
(a)
2
1. Spring preload adjusting bolt
2. Alignment marks
1. Spring preload adjusting bolt
2. Alignment marks
1
(b)
(a)
2
É
1
(b)
(a)
2
U5YUE5E0.book Page 17 Tuesday, March 17, 2009 9:02 AM