Operation Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6-7
6
EAU18760
Removing and installing the
cowling
The cowling shown above needs to be
removed to perform some of the main-
tenance jobs described in this chapter.
Refer to this section each time the
cowling needs to be removed and in-
stalled.
EAU36831
Cowling
To remove the cowling
Remove the bolts, and then pull the
cowling off as shown.
To install the cowling
Place the cowling in the original posi-
tion, and then install the bolts.
TIP
Make sure that the grommet fits over
the projection.
1. Cowling
1. Cowling
2. Bolt
1. Cowling
2. Bolt
1. Cowling
2. Projection
3. Grommet
U5YUE5E0.book Page 7 Tuesday, March 17, 2009 9:02 AM