Operation Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6-30
6
EAU36812
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the screws.
2. Remove the license plate light lens
by removing the screws.
3. Remove the burnt-out bulb by pull-
ing it out from the socket.
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the screws.
6. Install the license plate light cover
by installing the screws.
1. Screw
2. License plate light cover
1. Screw
2. License plate light lens
1. License plate light bulb
U5YUE5E0.book Page 30 Tuesday, March 17, 2009 9:02 AM