User Manual

Main screen

Yamaha LAN Monitor User Guide

6 [Web GUI] button (shown only for a slave device with a Web GUI)

When you click this, the Web GUI of the device currently selected in the tree appears in the default browser.

In the Web GUI, you can configure basic settings for Yamaha switch and Yamaha wireless LAN access point

and manage them. For details, refer to “Logging in to the Web GUI” (page 30).

7 Button to show/hide device details

Click the button to switch whether device details are shown or hidden.

For Dante-enabled devices, the switch button is not shown.

Tree view

This area shows the Yamaha switch, and Dante-enabled devices detected by Yamaha LAN Monitor. The device

name and the number of connected devices (slave devices only) are shown at the right of the icon; when you click

the open/close button [>] located at the left of the icon, the devices connected below that slave device are shown.

NOTE

This will not function until a Yamaha switch is found.

1 Sorting order reference node selection pull-down menu

Selects the Yamaha switch that you want to appear at the top of the tree view. These are shown in their

connection order relative to the selected Yamaha switch.

NOTE

• Only the Yamaha switch for the current network will appear in the sorting order reference node selection pull-down menu.

• When starting Yamaha LAN Monitor, the Yamaha switch closest to the computer will serve as the starting point for the tree

view.

2 Tree view

This area shows the Yamaha switch, and Dante-enabled devices detected by Yamaha LAN Monitor.

If a device that was recorded in the snapshot is no longer found, or if the connection port is different, a red error

icon ( ) is shown for the slave that is above the corresponding device. If a device that was not recorded

previously is newly found, a blue notification icon ( ) appears on the slave that is above the corresponding

device.

PoE supply class

Configures the PoE supply class settings.

This is shown only for SWX2200-8PoE. Click the [Setting] button to display the “PoE supply

class” dialog box.

• Default

Ports 1, 3, 5, and 7: class4 (30 W)

Ports 2, 4, 6, and 8: class3 (15.4 W)