User Manual
Table Of Contents
- 0. Revision History
- 1. Setup
- 2. Command List
- 3. Command Specifications
- 4. Command Sequence
- 5. Meter Value
- 6. Parameter Value Details
- 6.1. Fader parameter
- 6.2. Other parameters (MTX3, MTX5-D)
- 6.3. Other parameters (MRX7-D)
- 7. Parameter List
- 8. Meter List
MTX3/MTX5-D/MRX7-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V3.2.0 rev11
33
3. Command Specications
3.4. Extended commands
3.4.1. Product information query request
3-1) MTX external control protocol version query
Command Option 1 Description
devinfo protocolver Queries the MTX external control protocol version
Response
Response string Description
OK devinfo protocolver "xxxx" MTX external control protocol version
Details: xxxx = Version
Example: Command: devinfo protocolver
Notication: OK devinfo protocolver "1.0.0"
Meaning: Query the protocol version.
Protocol version = V1.0.0
3-2) Parameter set version query
Command Option 1 Description
devinfo paramsetver Queries the parameter set version
Response
Response string Description
OK devinfo paramsetver "xxxx" Parameter set version
Details: xxxx = Version
Example: Command: devinfo paramsetver
Notication: OK devinfo paramsetver "MTX:1.2.0"
Meaning: Query the parameter set version.
Parameter set version = V1.2.0
3-3) Firmware version query
Command Option 1 Description
devinfo version Queries the rmware version
Response
Response string Description
OK devinfo version "xxxx" Firmware version
Details: xxxx = Version
Example: Command: devinfo version
Notication: OK devinfo version "1.0.0"
Meaning: Query the rmware version.
Firmware version = V1.00
3-4) Product name query
Command Option 1 Description
devinfo productname Queries the product name
Response
Response string Description
OK devinfo productname "xxxx" Product name
Details: xxxx = Product name
Example: Command: devinfo productname
Notication: OK devinfo productname "MTX3"
Meaning: Query the product name.
Product name = "MTX3"