User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Control
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Screen structure
- Basic process
- Start up, and register devices
- Placing widgets on a page
- Labeling widgets for easier recognition
- Adding a page
- Specifying a background for the page
- Adjusting the placement of the widgets
- Saving the project file
- Testing operation
- Making security settings
- Creating a controller file
- Making KIOSK start automatically
- Adding parameters or meters for an MTX/MRX system
- Functions specific to initial mode
- Title bar
- Menu bar
- Tool bar
- “Controllers” area
- “Devices” area
- “Widgets” area
- Work area
- “Properties” area
- Widgets
- Dialog boxes and windows
- “Setup” dialog box
- “New Project Wizard” dialog box
- “Add Controller” dialog box
- “Run Controller File” dialog box
- “Import Controller File” dialog box
- “Select Controllers to Import” dialog box
- “Export Controller File” dialog box
- “Imported Images” dialog box
- “Add Device” dialog box
- “Target Editor” dialog box
- “Edit Text” dialog box
- “Edit Device Identifier” dialog box
- “Select Image” dialog box
- “Master Style” dialog box
- “System Monitor” window
- “ProVisionaire Monitoring Service Settings” view
- Specifying the IP address
- Tips
- Troubleshooting
27
Let’s operate the widgets on each page to verify that they work. We
assume that there is a device that is being controlled.
1. Power-on the device.
2. Connect the computer to the network that is con-
nected to the device’s NETWORK port.
For details on settings for the computer, refer to “Specifying the IP
address.”
3. On the title bar, click the [Setup] button .
The “Setup” dialog box opens.
4. Select the network interface card that is connected to
the network that is connected to the device’s NET-
WORK port.
5. Click the [OK] button.
The dialog box closes.
6. In the “Controllers” area, select the controller that you
want to operate.
7. On the tool bar, click the [Run] button .
KIOSK starts.
NOTE
An instance of KIOSK that is started by clicking the [Run] button dif-
fers from a stand-alone instance of KIOSK; for example, it has no
[Setup] button.
8. Note that the indication “All Devices are ONLINE” is
shown in the upper right.
If this indicates “All Devices are OFFLINE,” then KIOSK has not
detected the devices. Make sure that the network settings of the
devices and the computer are correct.
9. Click the button labeled “CL5.”
The page changes.
10. Operate the fader and button, and verify that they
are linked with the device.
If you want to edit the placement etc., exit KIOSK and proceed as
described in “Adjusting the placement of the widgets.” The
changes are not applied if KIOSK is left running.
11. Exit KIOSK.
Testing operation