User Manual

37
For a Slider
[Slit] tab
Direction: Specifies the slider’s direction (Vertical/Horizontal 1/
Horizontal 2).
Lower Color: Specifies the color inside the slit below the current
value. Specifying a color
Upper Color: Specifies the color inside the slit above the current
value. Specifying a color
Gradient: Adds a gradient to the slit surface.
Round Corners: Selects whether the corners of the slit are
rounded.
Width: Specifies the width of the slit.
Border Style: Specifies the style of the border.
Border Color: Specifies the color of the border. Specifying a
color
Border Width: Specifies the thickness of the border.
[Knob] tab
Style: Specifies the style of knob (None/Circle/Ring/Fader A/
Fader B/Fader C/Fader D).
* If you specify None (no knob), the fader cannot be operated (meter dis-
play only).
Tooltip: Shows/hides the parameter value when the knob is oper-
ated.
* The value indication can be switched between Raw or Normalized.
Assigning parameters
Width: Specifies the knob size.
[Guidelines] tab
Type: Specifies the style of guidelines: None, Normalized, 0 dB,
or 10 dB.
Position: Specifies the location in which the guidelines are dis-
played (Left/Right/Full).
Color: Specifies the color of the guidelines. Specifying a color