User Manual
13.11.5. "Recall Settings" dialog box
•
GPI Out
Here you can specify the GPI OUT settings that will be output when the snapshot is recalled.
You can use GPI OUT output to control a device that’s connected to this unit’s [GPI OUT] connector.
[Active]/[Inactive]/[Ignore]buttons
Specify whether the GPI OUT connector’s output will be enabled (Active), enabled with the OUTPUT TYPE
inverted (Inactive), or ignored (Ignore).
If the [OUTPUT TYPE] in the GPI Output dialog box setting is set to [Pulse] or [Pulse Inv.], the only available
choices will be [Active] and [Ignore].
◦ If [Active] is specified
When [OUTPUT TYPE] is [Closed], the [GPI OUT] pin will be closed (connected to ground).
When [OUTPUT TYPE] is [Open], the [GPI OUT] pin will be open.
When [OUTPUT TYPE] is [Pulse], the [GPI OUT] pin will be closed (connected to ground) for
approximately 250 ms.
When [OUTPUT TYPE] is [Pulse Inv.], the [GPI OUT] pin will be open for approximately 250 ms.
◦ If [Inactive] is specified
When [OUTPUT TYPE] is [ Closed], the [GPI OUT] pin will be open.
When [OUTPUT TYPE] is [ Open], the [GPI OUT] pin will be closed (connected to ground).
◦ If [Ignore] is specified
There will be no change in the output. Use this setting if a different function is assigned to GPI OUT
and you don’t want that function to be affected by snapshot recall.
• SD Song Play
◦ Pause
Stops playing the file immediately when a snapshot is recalled.
◦ Play
Plays the specified file immediately when a snapshot is recalled.
You can play files that are stored on the SD card specified in the “SD Card File Manager” dialog box.
13. Audio Processors : DME7
ProVisionaire Design User Guide | 141