User's Manual

“Update Firmware” dialog box Chapter 7. Dialog boxes
MTX Editor User’s Manual
142
“Update Firmware” dialog box
This dialog box lets you update the firmware of a unit such as an MTX or XMV.
For Dante units such as the MTX5-D and the XMV8280-D, there may be cases in which
the Dante firmware needs to be updated. For details on how to update the Dante firmware,
refer to the “MTX System Firmware Update Guide.”
In some cases, updating may cause data to no longer be compatible. Save the latest project
file before you update. After you update, use the most recent version of MTX Editor to open
the latest project file.
● Folder
Display the folder that contains the update files shown in the “Firmware in this file”
section.
● [...] button
Click this button to select an update file. Clicking this button will open the “Select
Folder” dialog box. Select the folder that contains the update file.
● Firmware in this file
Shows firmware versions resident in the folder for each device.
● Detected Devices
Shows detected devices.
Unit ID................... Shows the UNIT ID of the device.
Type ........................ Shows the model name of the device.
Ver sion ................... Shows the firmware version of the device.
● [Update] button
Executes the update.
If an update file does not exist in the selected folder, this button will be dimmed and
unavailable.
NOTE