User's Manual

“Get Log” dialog box Chapter 7. Dialog boxes
MTX Editor User’s Manual
176
❑ “Get Log” dialog box
A record of the MTX system’s operation is stored as a “log” in the MTX’s internal memory. In this
dialog box you can output the logs of all MTX units existing on the subnet to which your computer
is connected, and save them as a file. The log file is in “.csv” format.
The Project screen’s [Alert] tab does not show the information listed in the alert list, but this is
captured in the log.
● [Output File Name] box
Shows the location (absolute path) in which the log file is saved. You can also enter this
directly.
● Browse button
Opens the file browser and selects the file that will be output as the log.
● [Log Clear] button
Deletes the log for all MTX units existing on the subnet.
When you click this button, a confirmation message will appear. If you click the [Yes]
button, the log will be deleted. If you click the [No] button, the operation will be
cancelled and the dialog box will close. You may be asked to enter the PIN code.
● [OK] button
Outputs the log file and closes the dialog box.
● [Cancel] button
Cancels log file output and closes the dialog box.
NOTE
Browse button