User Manual

Example 1) Ballroom where the Room Combiner can be used
MRX Setup Manual
38
In this example, we’ll see how we can avoid the unnecessary use of DCP switches and knobs, such as by assigning a single
fader to a stereo pair of inputs (such as a Blu-Ray player or AUX In), or by making a single ON button for both L and R.
Here we’ll create a parameter link group that links multiple parameters such as levels or ON/OFF, so that we can change
multiple parameters at the same time with a DCP knob or button.
As with snapshots, parameter link groups are registered by dragging and dropping while holding down <Ctrl>. However, in
this example we will use a different method, since there are a total of 24 parameters to change. The same operation can be
used with snapshots.
1.
Open the “Parameter Link Group” area on the left side of the MRX Designer, in order to
check the parameters that are registered.
Setting a parameter link group