User Manual
MTX3/MTX5-D/XMV Series/EXi8/EXo8 Remote Control Protocol Specications V1.3.0
2
0. Revision History
Version Date Section Description
V1.0.0 Sep. 1, 2013 - Initial version
V1.0.1 Sep. 25, 2013 7 Added note (*1) to XMV "InputSelect" parameter
7 Added *2 to XMV "ATT" and "DigitalATT"
8 Separated Meter List of EXi8 and EXo8
V1.0.2 Jan.14, 2014 3.1 Added Heart beat command
3.1 Added explanation for escape character
3.2.4 Added note for "1-10) Time synchronization notication <Old format>"
3.2.4, 3.4.3 Added time set and get commands
3.2.4, 3.4.3 Added DST related commands
3.3.1 Added note for "2-1) Device run mode query"
3.3.3 Modied description text and added note for "2-9) Keepalive activation setting"
3.4.3 Added alert event log related commands
4 Fixed text "devstatus devmode" to "devstatus runmode" in communication start process explanation
4 Fixed communication start process ow diagram
6 Added parameter value detail for MY4-AEC (table 12, 13, 14)
7 Added parameter "MYInsert 16 Channel" to Parameter List
7 Added MY4-AEC parameters to Parameter List
7 Amend description for parameter "Power" in XMV Parameter List
8 Added MY4-AEC address to Meter List
V1.0.3 May 23, 2014 3.3.1, 4 Added clarication of [devstatus runmode] command, which is necessary to establish remote control
communication.
V1.3.0 Nov. 1, 2014 1.3.1, 1.3.2 Increased total number of remote controller devices which can simultaneously access the MTX
system.
3.1 Fixed some incorrect values in the "Normalized Value" column of the table, and in the note below the
table.
3.3.5 Added "setr" command, which allows relative inc/dec level control.
6 Added "value to data" tables for fader parameters.
7 Added comments in remarks column for when "setr" command is available.
7 Added "DigitalInputSensitivity" parameter for XMV