User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Configuring the device
Yamaha LAN Monitor for Win User Guide
38
Port settings
Click the [Port settings] tab, and then click a port number to display the following setting items.
Of the following items, only the setting items marked with ✓ are displayed.
Items
SWX2110/
SWX2110P
series
SWX2200
series
Descriptions
Basic functions
✓✓
Configures the basic functions of the port.
Click the [Settings] button to display the “Basic functions”
dialog box.
QoS
✕✓
Configures the QoS settings.
Transmit shaping and receive policing are shown only for
SWX2200-24G.
They are not shown for SWX2200-8PoE or SWX2200-8G.
Click the [Settings] button to display the “QoS” dialog
box.
Tag VLAN
✓✓
Configures the tag VLAN settings.
Click the arrow ( ) to display the [Settings] button.
Click the [Settings] button to display the “Tag VLAN”
dialog box.
Multiple VLAN
✕✓
Configures the multiple VLAN settings.
Click the arrow ( ) to display the [Settings] button.
Click the [Settings] button to display the “Multiple VLAN”
dialog box.
Frame counter
✕✓
Configures the frame counter settings.
There are three items for SWX2200-8PoE and SWX2200-
8G, or five items for SWX2200-24G.
Click the [Settings] button to display the “Frame counter”
dialog box.
PoE supply class
✕✓
Configures the PoE supply class settings.
This is shown only for SWX2200-8PoE.
Click the [Settings] button to display the “PoE supply
class” dialog box.
PoE power supply
✓✕
Configures the PoE power supply settings.
This is displayed only for the SWX2110P-8G.
Click the [Settings] button to display the “PoE power
supply” dialog box.