User Manual

Wireless DCP Owner’s Manual
18
3. Configuration
 3.3.5 Manual IP
Add the IP address to connect the MTX processor and manually display the device for connection
on the device list.
1
 Entering the IP address
 Step A : List button
1. Tap the Manual IP list button to display the
Manual IP screen.
2. Tap the + button to display the Add IP
Address screen.
3. Enter the IP address using the keyboard.
4. Tap the Done button to check the added
IP address on the Manual IP screen.
3
4
Normally, MTX processors are automatically
detected and displayed on the Select Device list.
However, in rare cases auto-detection may not be pos-
sible with certain Wi-Fi device specifications.
In such cases, use the Manual IP function to instead
manually add the MTX processor’s IP address.
Once the IP address is added into the Manual IP list,
that MTX processor becomes available on the Select
Device list.