User Manual

Wireless DCP Owner’s Manual
33
7. Settings Screen
Tap Change PIN to modify the PINs set for Wireless DCP on the currently connected MTX proces-
sor.
7.3 Changing PINs
2
1
3
4
6
 To change a PIN
1. Select the type of PIN to be changed
(i.e., administrator or staff).
2. Enter the current PIN.
3. Enter the new PIN.
4. Re-enter the new PIN for confirmation.
5. A message will be displayed to indi-
cate that the PIN has been success-
fully changed. Tap OK to continue.
6. Tap Settings to return to the top level
of the Settings screen.
NOTE
PINs can be changed only when
logged into the MTX processor using
an administrator PIN.