User Manual

Wireless DCP Owner’s Manual

8. Troubleshooting

 Difficulty moving multiple faders

(for the iPad)

Possible cause

If Multitasking Gestures is turned on, it may not be possible to move

more than three faders simultaneously in Wireless DCP.

Action

When using this app on your iPad, therefore, we recommend that

you turn Multitasking Gestures off as described below.

1. Go to Settings on your iPad.

2. Tap General.

3. Tap the Multitasking Gestures switch to turn it off.

 Difficulty operating multiple

switches (for the iOS device)

Possible cause

If Zoom is turned on, it may not be possible to operate more than

three switches simultaneously in Wireless DCP.

Action

When using this app on your iOS device, we recommend that you

turn Zoom off as described below.

1. Go to Settings on your iOS device.

2. Tap General.

3. Tap Accessibility.

4. Tap the Zoom switch to turn it off.

 Difficulty operating player and set-

ting presets

Possible cause

• The firmware for the MTX processor is an older version.

• Offline demo mode state.

Action

Use the latest version of the firmware for MTX processor.

Use MTX Editor to update the firmware for the MTX processor or

check the firmware version.

Refer to the MTX Editor User’s Manual.

C.S.G., PA Development Division

409PO-D0