User Manual

48
“Devices” area
This area shows the devices registered in the project and the parame-
ters of those devices.
Place widgets in the work area by dragging and dropping parameters
into the work area.
If the parameter has multiple instances, such as the [On] switch of an
input channel, a dialog box asks you which should be assigned when
you drop the item. In the dialog box, you can use the <Ctrl> key or
<Shift> key to make a multiple selection.
By clicking the triangle located at the left of a device or parame-
ter , you can expand or collapse the display for each individual
device or parameter.
Use the tab below to switch between showing the “Devices” area or
the “Widgets” area. If you click “ ,” the area floats, and the tab is
not shown.
If an unregistered device is detected, a “?” is shown at the left of that
device.