User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Update the firmware
Yamaha LAN Monitor for Mac User Guide
43
4. Press the “Firmware Update” button.
5. Click the “Browse” button to select the firmware file for each model.
6. After selecting the file, check the firmware revision of the file and press the “Execute” button.
7. Wait until the progress bar reaches 100%.
NOTE
The progress bar will be at 50% when the firmware file transfer is complete, and at 100% when the updated firmware
revision has been verified.