User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Resources
Yamaha LAN Monitor for Mac User Guide
55
[Bandwidth(%)] tab icons
This area shows the bandwidth usage of each port (Yamaha switches only).
Icon Meaning
Bandwidth from 95% to 100%
Bandwidth from 85% to less than 95%
Bandwidth from 75% to less than 85%
Bandwidth from 65% to less than 75%
Bandwidth from 55% to less than 65%
Bandwidth from 45% to less than 55%
Bandwidth from 35% to less than 45%
Bandwidth from 25% to less than 35%
Bandwidth from 15% to less than 25%
Bandwidth from 7.5% to less than 15%
Bandwidth from 0% to less than 7.5%
Abnormality occurred
Link down
As this is a stack port, bandwidth
usage cannot be displayed
Alert state (SFP port)