User Manual
Table Of Contents
- Cover
- Introduction
- Setup workflow
- Example 1) Ballroom where the Room Combiner can be used
- Example 2) Remote conferencing system that also uses Speech Privacy
- Using the Device Configuration Wizard to create your device setup
- Configuring the settings on the MRX
- Making EXT. I/O settings
- Connecting the equipment
- Powering-on the MRX
- Powering-on the amp
- Specifying the computer’s TCP/IP address
- Sending the Speech Privacy environmental sound
- Taking MTX-MRX Editor online
- Verifying that the settings were applied
- Example 3) A paging system using the PGM1
- Using the Device Configuration Wizard to create your device setup
- Specifying the MRX configuration
- Making EXT. I/O settings
- Connecting the equipment
- Powering-on the PoE-equipped gigabit network switch
- Specifying the MCP1’s UNIT ID
- Power-on equipment other than amps and powered speakers
- Power-on amps and powered speakers
- Specifying the computer’s TCP/IP address
- Taking MTX-MRX Editor online
- Verifying that the settings were applied
- Q&A
- Uninstalling the software (Removing the application)
Example 2) Remote conferencing system that also uses Speech Privacy
MRX Setup Manual
93
To change the parameters by operating the ProVisionaire Touch, register the parameters in the Remote Control Setup List,
and output the file. Add the outputted rcsl file as a document to ProVisionaire Touch on the iPad.
Register the following parameters in the Remote Control Setup List. The steps for registering will be explained later.
Now we’ll explain how to register the Remote Control Setup List. This time, we’ll explain how to do this by dragging and
dropping the parameters while holding <Ctrl> using the component editor and so on; but you can also drag and drop from
the “Parameters” area.
1.
Select [Remote Control Setup List] in the [Tools] menu.
The “Remote Control Setup List” dialog box will appear.
Creating the Remote Control Setup List used by ProVisionaire Touch
No.
Component or parameter link group that
includes the registered parameters
Parameters
001 Speaker Level Link Master fader
002 Mics On/Off [ON] button for Link Master
003 Speech Privacy Source 1 [ON] button