User Manual

“Get Log” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
231
❑ “Get Log” dialog box
A record of the MTX/MRX system’s operation is stored as a “log” in the MTX/MRX’s internal
memory. In this dialog box you can output the logs of all MTX/MRX units existing on the subnet
to which your computer is connected, and save them as a file. The log file is in “.csv” format.
• The Project screen’s [Alert] tab does not show the information listed in the alert list, but this
is captured in the log.
• The MCP1 and PGM1/PGX1 are not subject to capture in the log.
● [Output File Name] box
Shows the location (absolute path) in which the log file is saved. You can also enter this
directly.
● Browse button
Opens the file browser and selects the file that will be output as the log.
● [Log Clear] button
Deletes the log for all MTX/MRX units existing on the subnet.
When you click this button, a confirmation message will appear. If you click the [Yes]
button, the log will be deleted. If you click the [No] button, the operation will be
cancelled and the dialog box will close. You may be asked to enter the PIN code.
● [OK] button
Outputs the log file and closes the dialog box.
● [Cancel] button
Cancels log file output and closes the dialog box.
NOTE
Browse button