User Manual
[Alert] tab Chapter 3. Project screen
MTX-MRX Editor User Guide
56
[Alert] tab
Alert notifications from a device are shown by a popup window in MTX-MRX Editor (see “Alert list”).
Even if you close this popup window, you can use this tab to view alerts that have occurred in the past.
The R-series (AD/DA) and Tio1608-D are excluded.
● [Show alert popup] check box
If this is selected, a popup window will appear when alert notifications are received
from a device.
● [Get Log From Devices] button
The “Get Log” dialog box will appear.
● [CLEAR] button
Clears the currently-shown alert list.
● Alert list
•[Alert]
Shows the contents of the alert and an icon.
If you click the blue button, the “Solution” dialog box will appear, showing a solution
if one exists.
•[Alert No.]
Shows the alert number.
•[Status]
Shows the status of the event. In the case of an alert, this will indicate “Occurred”
when the alert occurs. There are two types of alert: momentary and continuing. In
the case of a continuing alert, this will indicate “Resolved” when the condition has
ended.
•[System]
This indicates the name of the MTX/MRX system in which the device is installed.
•[Type]
Indicates the type of device.
•[Unit ID]
Indicates the UNIT ID of the device.
•[Time]
Indicates the date and time that the alert occurred.
•[Count]
Indicates the total number of times that the same event occurred.
• The contents of the alert list will be deleted if you exit the project file that’s being edited or
if you reload a new file. If you want to view a past alert list, use “Get Log” dialog box to
receive the log.
• The alert list is saved within the device, but if the allowable memory size is exceeded, the
alerts will be overwritten starting with the oldest.
• When you use the [Get Log From Devices] button, alert lists produced by devices other
than the MTX/MRX will also be obtained.
NOTE