User Manual

13.8. Design sheet：Audio layer
This layer enables you to place audio components to create a configuration.
You can control audio signals by wiring between audio components.
13.8.1. Audio Component
For more information on how to use the component editor, refer to Chapter 12.
For details on components, refer to the "ProVisionaire Design DME7 Component Guide" .
13.9. Design sheet：Control layer
This layer handles control signals.
You can manipulate control signals by wiring between the control components or audio components.
Control components can be manipulated via changes in parameters or meters for the audio components. Audio
components can be manipulated via changes in parameters for the control components.
You can also place snapshots in the Control layer, which can be treated as part of the configuration.
13.9.1. Control Component
For more information on how to use the component editor, refer to Chapter 12.
For details on components, refer to the "ProVisionaire Design DME7 Component Guide" .
13.9.2. Using the audio component parameters in the Control layer
1. Select the Audio layer.
2. Select the “Parameters” area, and then select the audio component in the sheet.
In the Control PINs column, add a check mark to the check box for the desired parameters. The audio
component is placed in the Control layer, too.
13. Audio Processors : DME7
ProVisionaire Design User Guide | 127