User Manual

13.
Double-click the component that contains the parameter you want to edit.
The component editor appears.
There are two component editors in each device. One is common and the other is unique to the device. For
common component editors, refer to "ProVisionaire Design DME7 Component Guide" .
For device-specific items, refer to the description of the "Component Editor" for each device.
14.
Edit the parameters.
If you want to make the same settings multiple times, right-click and choose [Copy] in the "Project" sheet
for the device that you’ve finished editing. On the device to which you want to apply the same settings,
choose [Paste Parameters] to apply the copied settings.
15.
When you are finished editing, save the project file.
You can save by clicking the button.
If you want to protect the file, you can specify a PIN code in the "Protect File" dialog box which you can
open from the [File] menu.

With the DME7, saving the project file while working online will save the file not only on the
computer but also on the device.
For more information, refer to the "File Storage" dialog box.
3. The basics of using ProVisionaire Design
ProVisionaire Design User Guide | 19