User Manual

Command Toolbar
button
Summary Dialog box that appears
[Select All] ---
[All]
Selects all objects in the "Project" sheet. If you
want to select the contents of a device group,
select the device group and then choose [All].
---
---
[All Components]
Selects all components in the “Device” sheet.
---
---
[All Devices]
Selects all devices in the "Project" sheet. If you
want to select the devices in a device group,
select the device group and then choose [All
Devices].
---
---
[All Wires]
Selects all wires in the "Project" sheet. If you want
to select the wires in a device group, select the
device group and then choose [All Wires].
---
---
[All Graphics]
Selects all graphics in the "Project" sheet. If you
want to select the graphics in a device group,
select the device group and then choose [All
Graphics].
---
---
[All Link Groups]
Selects all link groups in the "Tuning" sheet.
---
[Create Device
Group]
--- Groups the selected objects in the "Project" sheet
as a device group.
---
[Unpack Device
Group]
--- Unpacks the objects in the selected device group
onto the "Project" sheet.
---
[Unbundle Wires] --- Displays the wires connected to the selected
component or User Defined Block spaced apart at
equal intervals.
For more information, refer to
the section for the DME7.
[Bundle Wires] --- Displays the wires connected to the selected
component or User Defined Block overlaid
together.
For more information, refer to
the section for the DME7.
*1. In the [Properties] area, you can specify the operation that the [Undo]/[Redo] command will affect: either
placing/moving/deleting an object, or creating/deleting a wire between devices.
4. Menu bars and toolbar
26 | ProVisionaire Design User Guide