User Manual

Assigns the IP address of the default gateway.
•
DNS Server
Enter the DNS server address.
◦ [Obtain Default Gateway and DNS Server address automatically] check box
If this check box is selected, the IP address of the default gateway is obtained automatically. The
above IP address setting for the default gateway is ignored.
◦ [Apply to all the devices]button
The status of the default gateway and DNS server will be applied to the DME7 units.

When making settings, be aware that the network for the DME Control Port and the network
for the Device Control Port should not overlap (conflict).
● Dante Slot tab

Use Dante Controller to set the IP address for the Dante Port.
When setting this IP address, if you select “Manually Set IP Address,” make sure that the
Dante Slot is set to the same network.
10. Dialog boxes
68 | ProVisionaire Design User Guide