User Manual

Specifies the time when daylight saving time ends. If this is the same as the start time, select
[Same as Start time].
For example if you set Offset as 01:00 and End time as 12:00, the clock will be set to 11:00 when
daylight saving time reaches 12:00 on the last day of daylight saving time. If the [Same as Start
time] check box is selected, daylight saving time will automatically be cancelled and revert to
standard time on the last day of daylight saving time at the time specified by the Start time.
•
Day of the week
If this is on, the term of daylight saving time will be specified as a day of the week. Use Start and End to
specify which day of which week will be the start and end of daylight saving time. For example to specify
the first Sunday in April, choose “First,” “Sunday,” and “April”; to specify the last Sunday in October, choose
“Last,” “Sunday,” and “October.”
•
Day
If this is on, the term of daylight saving time will be specified as a day of a month. Use Start and End to
specify the dates that will be the start and end of daylight saving time.
•
[Update Now] button
When you click this, the device’s internal clock is updated according to the settings.
•
[Close] button
Closes the dialog box.

Events that are assigned within two hours before or after the beginning or end of daylight
saving time in the “Scheduler” dialog box will not be executed correctly.
10. Dialog boxes
ProVisionaire Design User Guide | 93