User Manual

10.21. "RM Series Settings" > "Sign up" dialog box
To open this dialog box, click [RM Series Settings] from the [System] menu on the menu bar, and then click [Sign
up…].
This dialog box enables you to set the initial password for an RM series unit.
To control the device from ProVisionaire Design, you must set an initial password.
•
Device List
Displays RM series units on the network for which an initial password has not been set.
◦ Unit ID / Model / Device Name
These columns indicate the device Unit ID, device model name, and device name.
To change the device name, use the [Device Name] field in the “Properties” area of the “Project”
sheet.
•
[Password] text box
Enter a password here (4-16 alphanumeric characters).
•
[Display a message when you discover a device that is not signed up or logged in.] check box
If this item is checked, and if ProVisionaire Design detects any devices for which the initial password has
not been set or any devices that have not signed in, the “Sign Up” or “Login” dialog box will automatically
appear.
10. Dialog boxes
ProVisionaire Design User Guide | 97