User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“DANTE” screen Chapter 4. System screen
MTX-MRX Editor User Guide
129
5 Matrix
Change the transmission/reception assignments by clicking the location at which an
input channel and output channel intersect. The connection is on when the ● symbol
is displayed. Devices for which Device Lock is specified by Dante Controller cannot be
changed.
If you execute Update Device Information which appears when you right-click, the
Device Lock status and the Rio/Tio’s Dante Device Name are updated.
In the matrix you can use the following operations to move the view.
• Use the cursor keys of the keyboard to move up/down/left/right
• Use the mouse wheel to move up/down
• Hold down <Shift> on the keyboard and use the mouse wheel to move left/right
● AES67
The MTX5-D, MRX7-D, and XMV series Dante-enabled models support AES67
starting with V3.20.
Use Dante Controller to set a device to AES67 mode. Use Dante Controller to specify
routing for AES67-enabled devices and MTX5-D, MRX7-D, and XMV series Dante-
enabled models.
If an MTX5-D, MRX7-D, or XMV series Dante-enabled model is receiving a signal
from any AES67-enabled device, the [Transmitters] area indicates “AES67,” and the
patching information is shown in the matrix.
Although patching with an AES67-enabled device can be deleted in MTX-MRX Editor,
it cannot be re-specified.
● Device Lock
The MTX5-D, MRX7-D, and XMV series Dante-enabled models support Device Lock
starting with V3.2.
Use Dante Controller to lock a device. Locked devices are shown in red.
NOTE