User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Settings” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
156
Main usage method
1. Prepare the SD memory card.
Copy the files that you want to play into the SD memory card. If you want to play
multiple files, place them in a folder no deeper than the first level.
2. Insert the SD memory card you prepared in step 1 into the computer.
3. In [SD Song Select & Play], click the MTX/MRX select button for the unit
into which you intend to insert the SD memory card.
The “SD Play (MTX)” dialog box will appear.
4. Click the [Browse] button, and select a file or folder.
5. Insert the SD memory card into the MTX/MRX.
6. Synchronize MTX-MRX Editor with the MTX/MRX (refer to “Online and
Synchronization”), sending the settings of MTX-MRX Editor to the
MTX/MRX.
7. Recall the preset.
The file or files in the SD memory card inserted in the MTX/MRX unit you selected
in step 2 will play.
If you specified a folder, you can replace the files in the folder and the result will be
the same.