User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
MTX-MRX Editor User Guide
164
Chapter 7.
Dialog boxes/Software applications
This chapter explains the dialog boxes and applications that you can open from the menu bar or tool
bar.
❑ “Startup” dialog box
This will appear when you start MTX-MRX Editor.
● [New file] option button
When you click the [OK] button, the “Device Configuration Wizard” dialog box will
appear.
● [Existing file on computer] option button
When you click the [OK] button, the selected file will open. If a PIN code has been
assigned, you will be asked to enter the PIN code.
● [Go online – From devices] option button
When you click the [OK] button, the MTX/MRX system settings will be loaded from
the currently-operating MTX/MRX units in the network, allowing you to create a
project file.
In order for the settings to be loaded, you must be connected to an MTX/MRX unit
with which MTX-MRX Editor has previously been “online.” If a PIN code has been
assigned to the device, you will be asked to enter the PIN code.
● [OK] button
Executes the operation that is selected by the option button.