User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Update Firmware” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
169
● [Update] button
Executes the update.
If an update file does not exist in the selected folder, this button will be dimmed and
unavailable.
● [Cancel] button
Cancels the update and closes the dialog box.
■ Update procedure
All applicable devices can be updated at the same time.
If there is an MTX/MRX unit with an assigned PIN code that differs from the project,
you’ll need to enter the PIN code.
1. For all applicable devices in the MTX/MRX system, turn DIP switches 7
and 8 OFF (RESUME mode).
2. Turn on the power of all applicable devices in the MTX/MRX system.
3. In the “Device Information” dialog box, click the [Update Firmware]
button.
If the “Select Folder” dialog box opens, select a folder that contains the update file,
then click the [OK] button.
4. The “Update Firmware” dialog box will appear.
This shows the firmware versions resident in the folder. If you select the other folder,
click the [...] button.
5. Click the [Update] button to execute the update.
During the update, the indicators of the devices will flash.
Do not turn off the power of the devices while the update is being executed.
6. When the update is completed, the indicators of the applicable devices
will light.
When the update is completed, the devices will restart automatically.
If the [ALERT] indicators of the applicable devices are flashing, the update has failed
due to an error. The front panel [PRESET} display will show an error number; refer to
the alert list in the appendix, and take the appropriate action.
7. Close the “Device Information” dialog box.
When the update has ended successfully, the devices will restart, and the devices in
the MTX/MRX system will reappear in MTX-MRX Editor’s Project window.
NOTE
NOTE
NOTE