User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Scheduler” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
190
“Add Event” dialog box / “Edit Event” dialog box
For details about settings that are unique to the MRX series, refer to “MRX Designer User
Guide.”
● EVENT NAME
Enter the name of the event.
● EVENT OPERATION
• [Type] box
Choose the operation that will be executed when the event occurs.
In the “Preset” dialog box operations such as GPI Out or SD Song Select & Play can
be included in the preset. Choose GPI Out if you want to control an external device via
[GPI OUT] without recalling a preset, or choose SD Song Select & Play if you want to
change the audio file that will play.
Preset Recall ......................A preset will be recalled.
GPI Out.............................. The [GPI OUT] connector will be controlled.
SD Song Select & Play .....An audio file saved on the SD memory card will play or
stop.
Snapshot Recall.................Recalls the MRX7-D’s parameters. For details, refer to
“MRX Designer User Guide.”
Paging .................................An audio message saved on the SD memory card will be
played for the specified broadcast destination (ZONE).
NOTE