User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“MCP1” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
210
● [Home]/[Page 1]–[Page 6] tabs
Here you can make settings related to the MCP1 page. The home page is the page that
appears at start-up, or when you touch the MCP1’s home switch.
In the home page, you can switch pages by assigning [Open Page] to a switch. Here we
explain using the [Page 1] tab.
The currently-selected switch is highlighted.
❍ [Power User Page [PIN required]] check box (other than the [Home] page)
If this check box is selected, the PIN code specified in the [Power User PIN:] field of
the “PIN Setup” dialog box must be entered on the MCP1 when the page is opened.
❍ [Label] button
When you click this button, the “Label” dialog box appears, allowing you to create
an image for the display. The currently specified image is shown below the button.
❍ Switch select buttons
When you click a button, the “Settings” dialog box will appear, letting you make
settings for each switch.
Specify the device or parameter that will be controlled by the switch.
❍ [FUNCTION]/[DEVICE]/[PARAMETER]
These show the items specified in the “Settings” dialog box.