User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“PGM1/PGX1” dialog box Chapter 7. Dialog boxes/Software applications
MTX-MRX Editor User Guide
218
● [Function Assign] tab
Here you can assign functions to the zone/message select buttons of the PGM1 or
PGX1.
“FUNCTION” provides the following choices.
• [No Assign]
No function is assigned to the button.
•[Zone]
Selects/de-selects the zone to broadcast.
When selected, the zone/message indicator is lit.
•[Zone Group]
Selects/de-selects multiple zones to broadcast in a single operation.
Make zone group settings for the MTX5-D in “PAGING” of the “ZONE” screen, or
for the MRX7-D in the “Zone Group” window of the “Paging” component.
The zone/message indicator is lit when broadcast is possible to all zones that are
registered in the group.
•[Zone Group (Legacy)]
Selects multiple zones to broadcast in a single operation. De-selection is not
possible.
Make zone group settings for the MTX5-D in “PAGING” of the “ZONE” screen, or
for the MRX7-D in the “Zone Group” window of the “Paging” component.
• [SD Message]
Selects the file of the message to play.
• [All Zone Off]
De-selects all zones/zone groups.
This does not affect the selection status for the zones/zone groups of other PGM1/
PGX1 units.