User Manual

List of settings in “Settings” dialog boxes Appendix
MTX-MRX Editor User Guide
260
●If [FUNCTION] is [MTX Dugan Automixer]
Parameter on/off operations will control the GPI Output.
Select one of the following parameter types, and then make the appropriate setting.
•Override (master)
•Mute (master)
•override (Ch)
❍ [DEVICE]
Select the device that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER 1]
For Override (master) and Mute (master), select the group that controls on/off. For
override (Ch), select the channel that controls on/off.
❍ [OUTPUT TYPE]
Specifies how output will occur from the [GPI OUT] connector.
● If [FUNCTION] is [MTX Level]
Controls the GPI Output according to the level (volume changes) of each channel. You
can use this to fader-start a CD player, or to light an indicator when high volume
occurs.
Select one of the following parameter types, and then make the appropriate setting.
•Input Ch Level
•Fx RTN Level
•Matrix Out Level
•ZONE Out Level
•Output Ch Level
•1st Priority Mix Level
•2nd Priority Mix Level
•Input Ch DCA Group
•ZONE Out DCA Group
❍ [DEVICE]
Select the device that you want to change.
❍ [PARAMETER1]
Specify the channel that will be used to control the [GPI OUT] connector.
❍ [OUTPUT TYPE]
Specifies how output will occur from the [GPI OUT] connector.
❍ [Threshold]
Specifies the threshold value of the parameter. The values that can be specified will
depend on the type of parameter.
❍ [Direction]
Specifies the direction of change for the parameter that will control the [GPI OUT]
connector.