User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Moving between screens Chapter 1. An overview of MTX-MRX Editor
MTX-MRX Editor User Guide
27
Moving between screens
(*1)The “Device Configuration Wizard” dialog box can be opened only from the Project screen.
(*2)Not shown if the MRX is not selected in the “Device Configuration Wizard” dialog box. For
details about this screen, refer to “MRX Designer User Guide.”
(*3)Not shown if the MY4-AEC is not selected for the MTX5-D in the “Device Configuration
Wizard” dialog box.
Project screen
System screen
(“MAIN”
screen or
“MRX
Designer”
window) (*2)
SYSTEM tab [Project] tab
Toolbar or menu
Dialog boxes (*1)
[EXT. I/O] button
“EXT. I/O” screen
[MATRIX] button
[INPUT] button
[ROUTER] button [EFFECT] button
[DCA] button
“MATRIX” screen
“INPUT” screens “ZONE” screen
“ROUTER” screen “EFFECT” screen
“DCA” screen
Toolbar or menu
“EXo8” screen
“XMV” screen
[EXi8] button
[EXo8] button
[MY4-AEC]
button (*3)
“MY4-AEC” screen“OUTPUT” screens
[ZONE] button [OUTPUT] button
“EXi8” screen
[XMV] button
“I/O” screen
[I/O] button
[R/Tio] button
“R/Tio” screen