User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Menu bar Chapter 2. Menu bar and tool buttons
MTX-MRX Editor User Guide
29
Menu Command Summary
Dialog box that
appears
[File]
[New]
Creates a new project file.
If you are currently editing a project file, a
confirmation message will appear.
This command is not available while online.
“Device Configuration
Wizard” dialog box
[Open]
Opens a saved project file.
If you are currently editing a project file, a
confirmation message will appear.
This command is not available while online.
“Open File” dialog box
[Go Online –
From Devices]
Loads the settings of the MTX/MRX system into
MTX-MRX Editor.
You can use this command if you have lost the setup
file of the MTX/MRX system.
If you are currently editing a project file, a
confirmation message will appear.
This command is not available while online.
“Go online – From
devices” dialog box
[Save]
Saves the project file (overwriting the previous
version of the file).
The first time you save, the “Save File” dialog box will
appear; specify a name for the file and save it.
–
[Save As]
Saves the project file as a different file. When you
choose this command, the “Save File” dialog box will
appear.
“Save File” dialog box
[Security]
Specifies security settings to prevent another user
from making and saving changes to the system.
These settings are saved in the project file.
“Security Settings”
dialog box
[Project
Information]
Allows you to include a memo in the project file to
record property information or contact information.
“Project Information”
dialog box
[Print
Configuration
Diagram]
Displays a diagram that shows how devices such as
the MTX/MRX, XMV, and DCP are connected. The
configuration diagram can be printed.
“Configuration
Diagram” dialog box
[PGM1 Label
Creator]
Starts the “PGM1 Label Creator” application to
create labels for the PGM1/PGX1.
“PGM1 Label Creator”
application
[Recently
Opened Files]
Lists up to five most recently used project files,
allowing you to open them.
This command is not available while online.
–
[Exit]
Exits MTX-MRX Editor.
If the project file has been edited, a confirmation
message will appear.
This command is not available while online.
–