User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Menu bar Chapter 2. Menu bar and tool buttons
MTX-MRX Editor User Guide
31
[Controller]
[External
Events]
Enables you to configure the commands to be
transmitted so that you can control peripheral
devices via the network to which the Dante
connector or NETWORK connector is connected.
“External Events”
dialog box
[Digital Control
Panel]
Makes settings for the digital control panel (DCP).
“Digital Control Panel”
dialog box
[Wireless DCP]
Makes settings for the “Wireless DCP” iOS
application.
Except for templates, the items that can be set are
the same as for “Digital Control Panel.”
“Wireless DCP” dialog
box
[MCP1] Makes MCP1 settings. “MCP1” dialog box
[PGM1/PGX1] Makes PGM1/PGX1 settings.
“PGM1/PGX1” dialog
box
[About]
[Shortcut Keys] Shows a list of shortcut keys.
“Shortcut Keys” window
[Operation
Manual]
Displays basic operations.
“Operation Manual”
window
[About MTX-
MRX Editor]
Displays details such as the software version of
MTX-MRX Editor.
–
Menu Command Summary
Dialog box that
appears