User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
DANTE-connected devices Chapter 3. Project screen
MTX-MRX Editor User Guide
51
❑ DANTE-connected devices
Of the devices controlled by MTX-MRX Editor, the Dante units other than the MTX/MRX or
PGM1 are shown here.
List of Dante-connected devices
These are the Dante units within the MTX/MRX system, except for the MTX/MRX and
PGM1. An online indicator, the UNIT ID, the device type, and a graphic of the device are
shown. If you double-click the graphic of a device, the description of the DIP switches (or
the device setting DIP switches for the XMV) will be shown. If you double-click the device
graphic when MTX-MRX Editor has recognized a device, the current DIP switch setting
(or for the XMV, both device setting DIP switches and [SPEAKERS] DIP switches) will
appear. If you double-click the graphic of a device while online, the current settings of the
DIP switches are shown, allowing you to make HPF settings for each channel on the XMV.
For more about the online indicators, refer to “YDIF-connected devices.”
Identify button
When you click this, the indicator of the corresponding device will flash for approximately
five seconds, allowing you to identify the device.
Scroll buttons
Use these to scroll the display up or down.
List of DANTE-
connected devices
Identify button
Scroll buttons