User Manual

Router
MRX Designer User Guide
105
❑ Router
This component distributes inputs to output ports.
Although one input can be output to multiple channels, multiple inputs cannot be output to a single
channel. In other words, this component can distribute signals, but cannot mix them.
Select the number of channels (maximum 64In/64Out) when you place this component in the
design sheet. In the explanation here, the illustration shows the example of 8 input channels and 16
output channels.
“Router” component editor
Here you can specify how the signals are distributed.
1 [Clear] button
Turns all outputs off.
2 Router
This is a router that distributes the signals. Click a square in the grid to switch the
output on/off.
When you double-click a port name display area located above or to the left of the
router, a window opens, allowing you to edit the name of the port.
The grid squares can also be registered in a Parameter Set or Remote Control List by holding
down <Ctrl> and dragging and dropping.
2
1
NOTE