User Manual

Source Selector
MRX Designer User Guide
106
❑ Source Selector
This selects one source from multiple input sources.
Source indicates the number of input sources, and Channel indicates the number of channels of
those sources.
For example, a “4 Source 2 Channel” component selects one 2-channel source from four 2-channel
sources.
When placing this component in the design sheet, select the number of input sources (4/8/16) and
the number of channels in those sources (1/2/6 in the case of 4/8 input sources, or 1/2 in the case
of 16 input sources). The explanatory illustration here shows the example of four input sources
where each source has two channels.
“Source Selector” component editor
1 Selector buttons
Select the source that will be output.
2 Port name
Shows or edits the port name.
This is linked with the “Label” of the component’s ports.
21