User Manual

Basic use of MRX Designer
MRX Designer User Guide
11
6. Double-click a component or right-click it and choose “Open
Component Editor”; the component editor opens, allowing you to
operate the parameters.
7. When you have made the necessary settings, click the “Compile”
button to check whether there are any problems with the placement
and connections of the component.
The steps up to this point can be performed beforehand using MRX Designer.
To make connections with other equipment, you’ll use the “EXT. I/O” screen of
MTX-MRX Editor. For details, refer to the “MTX-MRX Editor User Guide.”
Go online with the MTX/MRX system, and then make detailed parameter settings.