User Manual
Table Of Contents
- Contents
- An overview of MRX Designer
- Screen structure
- Basic use of MRX Designer
- Menu bar
- Tool buttons
- Shortcut keys
- Design sheet
- “Parameter Sets” area
- “Parameter Link Group” area
- “Gang Edit Group” area
- “Properties” area
- Components and the component editor
- Editing the parameters
- Acoustic Echo Canceller (AEC)
- Ambient Noise Compensator (ANC)
- Audio Detector
- Auto Gain Controller (AGC)
- Combiner
- Delay
- Dynamics
- Effect
- EQ
- Fader
- Feedback Suppressor
- Filter
- Inputs/Outputs
- Meter
- Mixer
- Oscillator
- Paging
- Polarity
- Revolabs Control
- Router
- Source Selector
- Speaker Processor
- Speech Privacy
- Text
- Transmitter/Receiver
- User Defined Block
- Dialog boxes and applications
- “Print” dialog box
- “Install Speech Privacy File” dialog box
- “File Transfer” application
- “PGM1 Label Creator” application
- “Compile” dialog box
- “Snapshot Group” dialog box
- “Remote Control Setup List” dialog box
- “External Events” dialog box
- “GPI” dialog box
- “Digital Control Panel” dialog box / “Wireless DCP” dialog box / “MCP1” dialog box
- “PGM1/PGX1” dialog box
- “Port Name” dialog box
- List of settings in “Settings” dialog boxes
- Context menus
- Troubleshooting
Menu bar
MRX Designer User Guide
13
[Edit]
[Undo] Cancels the preceding operation.
*1
—
[Redo]
Re-executes the operation that was canceled by
[Undo].
*1
—
[Cut] Moves the selected item to the copy buffer. —
[Copy]
Copies the selected item to the copy buffer. The
copied component etc. can be pasted into
drawing software such as Paint.
—
[Paste] Pastes the item from the copy buffer. —
[Paste
Parameters]
Overwrites (copies) the parameters of the
component in the copy buffer to the selected
component.
—
[Paste to User
Defined Block]
Pastes the item from the copy buffer into the
selected User Defined Block.
—
[Delete] Deletes the selected component or wire. —
[Duplicate] Duplicates the selected component and wire. —
[Select All]
Selects all components, User Defined Blocks,
and wires in the design sheet.
If you want to select the contents of a User
Defined Block, select the User Defined Block and
then choose [Select All].
—
[Select All
Wires]
Selects all wires in the design sheet.
If you want to select the contents of a User
Defined Block, select the User Defined Block and
then choose [Select All Wires].
—
[Create User
Defined Block]
Encapsulates the selected components as a
User Defined Block.
—
[Unpack User
Defined Block]
Unpacks the components of the selected User
Defined Block onto the design sheet.
—
[Unbundle
Wires]
Displays the wires connected to the selected
component or User Defined Block spaced apart
at equal intervals.
—
[Bundle Wires]
Displays the wires connected to the selected
component or User Defined Block overlaid
together.
—
[Protect User
Defined Block]
Protects or unprotects a User Defined Block
whose [Lock Mode] is set to “View Only” or
“Protect.”
“Protect User Defined
Block” dialog box
or
“Unprotect User Defined
Block” window
Menu Command Summary
Dialog box or window
that appears